Dopo la formattazione, il disco esterno è "scomparso"

[dementialsite]

Ho un problema con il mio disco esterno (è un Packard Bell Carbon da 1 TB preso qualche mese fa, per la cronaca), in pratica dopo aver formattato il PC non riesco più ad accedere ai dati al suo interno.

I sintomi ce li ho, in forma diversa, tanto su Windows XP quanto su Ubuntu 9.10. Nello specifico, su Windows XP:
- nella "Gestione periferiche", compare tra le Unità disco e "funziona regolarmente" (mica tanto, a quanto vedo). Salvo che poi quando provo ad inserire i volumi nella scheda "Volumi", escono dei preoccupanti stati "sconosciuto" e "illeggibile"
- nella "Gestione dischi", sotto "Gestione computer", il disco non compare

Su Ubuntu 9.10, invece, collegando il disco semplicemente non viene montato (non mi compare sul desktop l'icona del disco), senza nessuna segnalazione.

Prima che me lo chiediate, ho già provato a:
- eseguire la "risoluzione problemi" di Windows, che ovviamente non ha portato a nessuna soluzione
- cercare eventuali driver del disco: l'unica cosa che ho trovato dal sito della PB è stata una serie di utilities che non hanno fatto altro che inchiodare il computer
- provare a scollegare l'alimentazione del disco e ricollegarla

Collegando un secondo disco esterno (però autoalimentato), questo funziona correttamente.

Ho anche provato ad accedere al BIOS del computer, ma non ho capito quali sono le opzioni che devo modificare.

Ultima consegna: non posso formattare l'hard disk, contiene dei dati importanti che non posso perdere.

C'è qualcuno che può aiutarmi a risolvere il problema?

Grazie a chi risponde... statemi bene...

[dapeco]

cosa ti risponde "dmesg" su ubuntu?

[darkwolf]

Su windows prova con partition table doctor (se hai hiren's boot cd lo trovi li dentro) :)

[dementialsite]

cosa ti risponde "dmesg" su ubuntu?

Posto l'output su una serie di post, è un po' lungo per inserirlo tutto:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[    0.000000]  BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 003FF00000 mask FFFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f000 (usable)
[    0.000000]  modified: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003fee0000 (usable)
[    0.000000]  modified: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[    0.000000]  modified: 000000003fee3000 - 000000003fef0000 (ACPI data)
[    0.000000]  modified: 000000003fef0000 - 000000003ff00000 (reserved)
[    0.000000]  modified: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 2f81b000 - 2ff673fe
[    0.000000] ACPI: RSDP 000f7760 00024 (v02 Nvidia)
[    0.000000] ACPI: XSDT 3fee30c0 00044 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 3feec380 000F4 (v03 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 3fee3240 090ED (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3fee0000 00040
[    0.000000] ACPI: HPET 3feec580 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 3feec600 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 3feec4c0 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 134MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [002f81b000 - 002ff673fe]          RAMDISK ==> [002f81b000 - 002ff673fe]
[    0.000000]   #5 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #6 [00008a9000 - 00008ac145]              BRK ==> [00008a9000 - 00008ac145]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00f5a80] f5a80
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003fee0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fee0
[    0.000000] On node 0 totalpages: 261743
[    0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 270 pages used for memmap
[    0.000000]   HighMem zone: 34260 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:b0100000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259697
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=e2937f9c-f5e2-4d2e-b7d4-af4e9d4bc8ec ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5236800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fee0)
[    0.000000] Memory: 1016788k/1047424k available (4566k kernel code, 29588k reserved, 2142k data, 540k init, 138120k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575bb4 - 0xc078d3c8   (2142 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575bb4   (4566 kB)

Segue... (1/7)

[dementialsite]

[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2009.109 MHz processor.
[    0.000011] spurious 8259A interrupt: IRQ7.
[    0.000921] Console: colour VGA+ 80x25
[    0.000924] console [tty0] enabled
[    0.001103] hpet clockevent registered
[    0.001107] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.001113] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.21 BogoMIPS (lpj=8036436)
[    0.001134] Security Framework initialized
[    0.001154] AppArmor: AppArmor initialized
[    0.001161] Mount-cache hash table entries: 512
[    0.001290] Initializing cgroup subsys ns
[    0.001294] Initializing cgroup subsys cpuacct
[    0.001298] Initializing cgroup subsys memory
[    0.001304] Initializing cgroup subsys freezer
[    0.001307] Initializing cgroup subsys net_cls
[    0.001319] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.001322] CPU: L2 Cache: 512K (64 bytes/line)
[    0.001324] CPU: Physical Processor ID: 0
[    0.001326] CPU: Processor Core ID: 0
[    0.001330] mce: CPU supports 5 MCE banks
[    0.001339] using C1E aware idle routine
[    0.001346] Performance Counters: AMD PMU driver.
[    0.001352] ... version:                 0
[    0.001354] ... bit width:               48
[    0.001356] ... generic counters:        4
[    0.001358] ... value mask:              0000ffffffffffff
[    0.001360] ... max period:              00007fffffffffff
[    0.001362] ... fixed-purpose counters:  0
[    0.001364] ... counter mask:            000000000000000f
[    0.001368] Checking 'hlt' instruction... OK.
[    0.018111] ACPI: Core revision 20090521
[    0.032504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072253] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4018.53 BogoMIPS (lpj=8037070)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] mce: CPU supports 5 MCE banks
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.160449] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.160475] Brought up 2 CPUs
[    0.160478] Total of 2 processors activated (8036.75 BogoMIPS).
[    0.160560] CPU0 attaching sched-domain:
[    0.160564]  domain 0: span 0-1 level MC
[    0.160567]   groups: 0 1
[    0.160572] CPU1 attaching sched-domain:
[    0.160574]  domain 0: span 0-1 level MC
[    0.160577]   groups: 1 0
[    0.160646] Booting paravirtualized kernel on bare hardware
[    0.160646] regulator: core version 0.5
[    0.160646] Time: 15:13:06  Date: 12/19/09
[    0.160646] NET: Registered protocol family 16
[    0.160646] EISA bus registered
[    0.160646] ACPI: bus type pci registered
[    0.160646] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.160646] PCI: MCFG area at f0000000 reserved in E820
[    0.160646] PCI: Using MMCONFIG for extended config space
[    0.160646] PCI: Using configuration type 1 for base access
[    0.161248] bio: create slab <bio-0> at 0
[    0.161248] ACPI: EC: Look up EC in DSDT
[    0.174479] ACPI: Interpreter enabled
[    0.174485] ACPI: (supports S0 S1 S3 S4 S5)
[    0.174511] ACPI: Using IOAPIC for interrupt routing
[    0.185086] ACPI: No dock devices found.
[    0.185997] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.186216] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[    0.186228] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[    0.186233] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[    0.186253] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.186259] pci 0000:00:01.1: PME# disabled
[    0.186309] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[    0.186330] pci 0000:00:02.0: supports D1 D2
[    0.186332] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186336] pci 0000:00:02.0: PME# disabled
[    0.186355] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[    0.186376] pci 0000:00:02.1: supports D1 D2
[    0.186378] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186382] pci 0000:00:02.1: PME# disabled
[    0.186409] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f]
[    0.186438] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7]
[    0.186442] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3]
[    0.186447] pci 0000:00:05.0: reg 18 io port: [0x970-0x977]
[    0.186451] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73]
[    0.186456] pci 0000:00:05.0: reg 20 io port: [0xdc00-0xdc0f]
[    0.186460] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[    0.186492] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7]
[    0.186496] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3]
[    0.186500] pci 0000:00:05.1: reg 18 io port: [0x960-0x967]
[    0.186505] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63]
[    0.186509] pci 0000:00:05.1: reg 20 io port: [0xc800-0xc80f]
[    0.186513] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[    0.186545] pci 0000:00:05.2: reg 10 io port: [0xc400-0xc407]
[    0.186549] pci 0000:00:05.2: reg 14 io port: [0xc000-0xc003]
[    0.186554] pci 0000:00:05.2: reg 18 io port: [0xbc00-0xbc07]
[    0.186558] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803]
[    0.186563] pci 0000:00:05.2: reg 20 io port: [0xb400-0xb40f]
[    0.186567] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[    0.186627] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
[    0.186652] pci 0000:00:06.1: PME# supported from D3hot D3cold
[    0.186655] pci 0000:00:06.1: PME# disabled
[    0.186691] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[    0.186695] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb007]
[    0.186700] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff]
[    0.186705] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f]
[    0.186726] pci 0000:00:08.0: supports D1 D2
[    0.186729] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186734] pci 0000:00:08.0: PME# disabled
[    0.186772] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186775] pci 0000:00:0a.0: PME# disabled
[    0.186807] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186810] pci 0000:00:0b.0: PME# disabled
[    0.186841] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186845] pci 0000:00:0c.0: PME# disabled
[    0.186876] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186879] pci 0000:00:0d.0: PME# disabled
[    0.186911] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186914] pci 0000:00:0e.0: PME# disabled
[    0.186945] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186948] pci 0000:00:0f.0: PME# disabled
[    0.187055] pci 0000:01:07.0: reg 10 32bit mmio: [0xfdef0000-0xfdef7fff]
[    0.187104] pci 0000:01:08.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff]
[    0.187110] pci 0000:01:08.0: reg 14 io port: [0xac00-0xac7f]
[    0.187137] pci 0000:01:08.0: supports D2
[    0.187139] pci 0000:01:08.0: PME# supported from D2 D3hot D3cold
[    0.187143] pci 0000:01:08.0: PME# disabled
[    0.187166] pci 0000:00:06.0: transparent bridge
[    0.187169] pci 0000:00:06.0: bridge io port: [0xa000-0xafff]
[    0.187172] pci 0000:00:06.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[    0.187347] pci 0000:07:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff]
[    0.187355] pci 0000:07:00.0: reg 18 64bit mmio: [0xfddf0000-0xfddfffff]
[    0.187360] pci 0000:07:00.0: reg 20 io port: [0x9c00-0x9cff]
[    0.187368] pci 0000:07:00.0: reg 30 32bit mmio: [0xfddc0000-0xfdddffff]
[    0.187382] pci 0000:07:00.0: supports D1 D2
[    0.187408] pci 0000:07:00.1: reg 10 64bit mmio: [0xfdde0000-0xfddeffff]
[    0.187433] pci 0000:07:00.1: supports D1 D2
[    0.187468] pci 0000:00:0f.0: bridge io port: [0x9000-0x9fff]
[    0.187472] pci 0000:00:0f.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[    0.187476] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.187489] pci_bus 0000:00: on NUMA node 0
[    0.187494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.187802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.282984] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.283169] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[    0.283349] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.283530] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.283711] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.283894] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
[    0.284081] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.284263] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.284444] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.284625] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.284807] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.284989] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)

Segue... (2/7)

[dementialsite]

[    0.285170] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.285352] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[    0.285533] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.285713] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.285896] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.286078] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[    0.286260] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
[    0.286482] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.286698] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[    0.286912] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.287128] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.287343] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.287558] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[    0.287773] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.287988] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.288213] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.288430] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.288646] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.288862] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.289079] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.289295] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.289511] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.289728] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.289945] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.290162] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.290378] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[    0.290578] SCSI subsystem initialized
[    0.290630] libata version 3.00 loaded.
[    0.290630] usbcore: registered new interface driver usbfs
[    0.290630] usbcore: registered new interface driver hub
[    0.290630] usbcore: registered new device driver usb
[    0.290630] ACPI: WMI: Mapper loaded
[    0.290630] PCI: Using ACPI for IRQ routing
[    0.300008] Bluetooth: Core ver 2.15
[    0.300026] NET: Registered protocol family 31
[    0.300026] Bluetooth: HCI device and connection manager initialized
[    0.300026] Bluetooth: HCI socket layer initialized
[    0.300026] NetLabel: Initializing
[    0.300026] NetLabel:  domain hash size = 128
[    0.300026] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.300039] NetLabel:  unlabeled traffic allowed by default
[    0.300070] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[    0.300076] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.308022] Switched to high resolution mode on CPU 0
[    0.308487] Switched to high resolution mode on CPU 1
[    0.316019] pnp: PnP ACPI init
[    0.316037] ACPI: bus type pnp registered
[    0.322355] pnp: PnP ACPI: found 14 devices
[    0.322357] ACPI: ACPI bus type pnp unregistered
[    0.322361] PnPBIOS: Disabled by ACPI PNP
[    0.322372] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.322375] system 00:01: ioport range 0x1080-0x10ff has been reserved
[    0.322379] system 00:01: ioport range 0x1400-0x147f has been reserved
[    0.322382] system 00:01: ioport range 0x1480-0x14ff has been reserved
[    0.322385] system 00:01: ioport range 0x1800-0x187f has been reserved
[    0.322388] system 00:01: ioport range 0x1880-0x18ff has been reserved
[    0.322394] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.322397] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.322400] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.322412] system 00:0d: iomem range 0xcf600-0xcffff has been reserved
[    0.322415] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[    0.322418] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[    0.322422] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[    0.322425] system 00:0d: iomem range 0xfefff000-0xfefff0ff has been reserved
[    0.322429] system 00:0d: iomem range 0x3fee0000-0x3fefffff could not be reserved
[    0.322432] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
[    0.322436] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.322439] system 00:0d: iomem range 0x100000-0x3fedffff could not be reserved
[    0.322443] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.322446] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.322450] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved
[    0.322453] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
[    0.322456] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved
[    0.322460] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved
[    0.357135] AppArmor: AppArmor Filesystem Enabled
[    0.357175] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[    0.357178] pci 0000:00:06.0:   IO window: 0xa000-0xafff
[    0.357182] pci 0000:00:06.0:   MEM window: 0xfde00000-0xfdefffff
[    0.357185] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.357189] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[    0.357191] pci 0000:00:0a.0:   IO window: disabled
[    0.357194] pci 0000:00:0a.0:   MEM window: disabled
[    0.357196] pci 0000:00:0a.0:   PREFETCH window: disabled
[    0.357200] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[    0.357202] pci 0000:00:0b.0:   IO window: disabled
[    0.357205] pci 0000:00:0b.0:   MEM window: disabled
[    0.357207] pci 0000:00:0b.0:   PREFETCH window: disabled
[    0.357210] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[    0.357213] pci 0000:00:0c.0:   IO window: disabled
[    0.357215] pci 0000:00:0c.0:   MEM window: disabled
[    0.357218] pci 0000:00:0c.0:   PREFETCH window: disabled
[    0.357221] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[    0.357223] pci 0000:00:0d.0:   IO window: disabled
[    0.357226] pci 0000:00:0d.0:   MEM window: disabled
[    0.357229] pci 0000:00:0d.0:   PREFETCH window: disabled
[    0.357232] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06
[    0.357234] pci 0000:00:0e.0:   IO window: disabled
[    0.357237] pci 0000:00:0e.0:   MEM window: disabled
[    0.357240] pci 0000:00:0e.0:   PREFETCH window: disabled
[    0.357243] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07
[    0.357246] pci 0000:00:0f.0:   IO window: 0x9000-0x9fff
[    0.357250] pci 0000:00:0f.0:   MEM window: 0xfdd00000-0xfddfffff
[    0.357253] pci 0000:00:0f.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.357263] pci 0000:00:06.0: setting latency timer to 64
[    0.357268] pci 0000:00:0a.0: setting latency timer to 64
[    0.357273] pci 0000:00:0b.0: setting latency timer to 64
[    0.357278] pci 0000:00:0c.0: setting latency timer to 64
[    0.357283] pci 0000:00:0d.0: setting latency timer to 64
[    0.357288] pci 0000:00:0e.0: setting latency timer to 64
[    0.357293] pci 0000:00:0f.0: setting latency timer to 64
[    0.357297] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.357300] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.357303] pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
[    0.357306] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[    0.357309] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.357312] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.357316] pci_bus 0000:07: resource 0 io:  [0x9000-0x9fff]
[    0.357319] pci_bus 0000:07: resource 1 mem: [0xfdd00000-0xfddfffff]
[    0.357322] pci_bus 0000:07: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.357360] NET: Registered protocol family 2
[    0.357458] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.357792] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.358416] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.358801] TCP: Hash tables configured (established 131072 bind 65536)
[    0.358804] TCP reno registered
[    0.358900] NET: Registered protocol family 1
[    0.358970] Trying to unpack rootfs image as initramfs...
[    0.567168] Freeing initrd memory: 7472k freed
[    0.572086] cpufreq-nforce2: No nForce2 chipset.
[    0.572113] Scanning for low memory corruption every 60 seconds
[    0.572219] audit: initializing netlink socket (disabled)
[    0.572236] type=2000 audit(1261235585.572:1): initialized
[    0.581330] highmem bounce pool size: 64 pages
[    0.581335] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.582734] VFS: Disk quotas dquot_6.5.2
[    0.582791] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.583345] fuse init (API version 7.12)
[    0.583435] msgmni has been set to 1731
[    0.583684] alg: No test for stdrng (krng)
[    0.583708] io scheduler noop registered
[    0.583711] io scheduler anticipatory registered
[    0.583713] io scheduler deadline registered
[    0.583758] io scheduler cfq registered (default)
[    0.596222] pci 0000:00:05.0: Enabling HT MSI Mapping
[    0.596271] pci 0000:00:05.1: Enabling HT MSI Mapping
[    0.596319] pci 0000:00:05.2: Enabling HT MSI Mapping
[    0.596367] pci 0000:00:06.0: Enabling HT MSI Mapping
[    0.596419] pci 0000:00:06.1: Enabling HT MSI Mapping
[    0.596479] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.596540] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.596607] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.596677] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    0.596751] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.596829] pci 0000:00:0e.0: Enabling HT MSI Mapping

Segue... (3/7)

[dementialsite]

[    0.596912] pci 0000:00:0f.0: Enabling HT MSI Mapping
[    0.596926] pci 0000:07:00.0: Boot video device
[    0.597035]   alloc irq_desc for 24 on node -1
[    0.597037]   alloc kstat_irqs on node -1
[    0.597046] pcieport-driver 0000:00:0a.0: irq 24 for MSI/MSI-X
[    0.597052] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[    0.597121]   alloc irq_desc for 25 on node -1
[    0.597123]   alloc kstat_irqs on node -1
[    0.597128] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
[    0.597133] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[    0.597200]   alloc irq_desc for 26 on node -1
[    0.597202]   alloc kstat_irqs on node -1
[    0.597207] pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
[    0.597211] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[    0.597276]   alloc irq_desc for 27 on node -1
[    0.597279]   alloc kstat_irqs on node -1
[    0.597284] pcieport-driver 0000:00:0d.0: irq 27 for MSI/MSI-X
[    0.597288] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[    0.597360]   alloc irq_desc for 28 on node -1
[    0.597362]   alloc kstat_irqs on node -1
[    0.597367] pcieport-driver 0000:00:0e.0: irq 28 for MSI/MSI-X
[    0.597371] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[    0.597438]   alloc irq_desc for 29 on node -1
[    0.597440]   alloc kstat_irqs on node -1
[    0.597445] pcieport-driver 0000:00:0f.0: irq 29 for MSI/MSI-X
[    0.597449] pcieport-driver 0000:00:0f.0: setting latency timer to 64
[    0.597509] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.597537] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.597683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.597687] ACPI: Power Button [PWRF]
[    0.597743] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.597746] ACPI: Power Button [PWRB]
[    0.597814] fan PNP0C0B:00: registered as cooling_device0
[    0.597819] ACPI: Fan [FAN] (on)
[    0.598412] processor LNXCPU:00: registered as cooling_device1
[    0.598447] processor LNXCPU:01: registered as cooling_device2
[    0.604148] thermal LNXTHERM:01: registered as thermal_zone0
[    0.604156] ACPI: Thermal Zone [THRM] (40 C)
[    0.604213] isapnp: Scanning for PnP cards...
[    0.956755] isapnp: No Plug & Play device found
[    0.957964] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.958064] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.958361] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.959399] brd: module loaded
[    0.959881] loop: module loaded
[    0.959962] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.960209] sata_nv 0000:00:05.0: version 3.5
[    0.960634] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.960642]   alloc irq_desc for 23 on node -1
[    0.960644]   alloc kstat_irqs on node -1
[    0.960655] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.960658] sata_nv 0000:00:05.0: Using SWNCQ mode
[    0.960705] sata_nv 0000:00:05.0: setting latency timer to 64
[    0.960884] scsi0 : sata_nv
[    0.960990] scsi1 : sata_nv
[    0.961171] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[    0.961174] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[    0.961561] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    0.961564]   alloc irq_desc for 22 on node -1
[    0.961566]   alloc kstat_irqs on node -1
[    0.961574] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    0.961576] sata_nv 0000:00:05.1: Using SWNCQ mode
[    0.961611] sata_nv 0000:00:05.1: setting latency timer to 64
[    0.961755] scsi2 : sata_nv
[    0.961820] scsi3 : sata_nv
[    0.961999] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22
[    0.962002] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22
[    0.962397] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[    0.962400]   alloc irq_desc for 21 on node -1
[    0.962402]   alloc kstat_irqs on node -1
[    0.962410] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[    0.962412] sata_nv 0000:00:05.2: Using SWNCQ mode
[    0.962447] sata_nv 0000:00:05.2: setting latency timer to 64
[    0.962592] scsi4 : sata_nv
[    0.962657] scsi5 : sata_nv
[    0.962835] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21
[    0.962839] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21
[    0.962947] pata_amd 0000:00:04.0: version 0.4.1
[    0.962982] pata_amd 0000:00:04.0: setting latency timer to 64
[    0.963046] scsi6 : pata_amd
[    0.963096] scsi7 : pata_amd
[    0.963897] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.963900] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.964672] Fixed MDIO Bus: probed
[    0.964707] PPP generic driver version 2.4.2
[    0.964820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.965205] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[    0.965209]   alloc irq_desc for 20 on node -1
[    0.965211]   alloc kstat_irqs on node -1
[    0.965220] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20
[    0.965232] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.965235] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.965296] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.965324] ehci_hcd 0000:00:02.1: debug port 1
[    0.965328] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.965362] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000
[    0.972846] ata3: SATA link down (SStatus 0 SControl 300)
[    0.983179] ata5: SATA link down (SStatus 0 SControl 300)
[    0.983195] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.983272] usb usb1: configuration #1 chosen from 1 choice
[    0.983302] hub 1-0:1.0: USB hub found
[    0.983312] hub 1-0:1.0: 10 ports detected
[    0.983382] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.983776] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.983780] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[    0.983789] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.983792] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.983825] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.983837] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[    1.038061] usb usb2: configuration #1 chosen from 1 choice
[    1.038088] hub 2-0:1.0: USB hub found
[    1.038097] hub 2-0:1.0: 10 ports detected
[    1.038161] uhci_hcd: USB Universal Host Controller Interface driver
[    1.038255] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.038257] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.038345] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.038419] mice: PS/2 mouse device common for all mice
[    1.038522] rtc_cmos 00:05: RTC can wake from S4
[    1.038556] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.038590] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.038691] device-mapper: uevent: version 1.0.3
[    1.038797] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.038896] device-mapper: multipath: version 1.1.0 loaded
[    1.038899] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.039029] EISA: Probing bus 0 at eisa.0
[    1.039034] Cannot allocate resource for EISA slot 1
[    1.039052] EISA: Detected 0 cards.
[    1.039183] cpuidle: using governor ladder
[    1.039185] cpuidle: using governor menu
[    1.039695] TCP cubic registered
[    1.039845] NET: Registered protocol family 10
[    1.040307] lo: Disabled Privacy Extensions
[    1.040629] NET: Registered protocol family 17
[    1.040647] Bluetooth: L2CAP ver 2.13
[    1.040649] Bluetooth: L2CAP socket layer initialized
[    1.040652] Bluetooth: SCO (Voice Link) ver 0.6
[    1.040654] Bluetooth: SCO socket layer initialized
[    1.040694] Bluetooth: RFCOMM TTY layer initialized
[    1.040697] Bluetooth: RFCOMM socket layer initialized
[    1.040699] Bluetooth: RFCOMM ver 1.11
[    1.040720] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[    1.040732] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    1.040733] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    1.040757] Using IPI No-Shortcut mode
[    1.040821] PM: Resume from disk failed.
[    1.040834] registered taskstats version 1
[    1.040994]   Magic number: 5:224:235
[    1.041044] fan PNP0C0B:00: hash matches
[    1.041108] rtc_cmos 00:05: setting system clock to 2009-12-19 15:13:07 UTC (1261235587)
[    1.041111] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.041113] EDD information not available.
[    1.055205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.116035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.125121] ata1.00: ATA-7: Maxtor 6V320F0, VA111900, max UDMA/133
[    1.125124] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    1.142134] ata1.00: configured for UDMA/133
[    1.142244] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6V320F0   VA11 PQ: 0 ANSI: 5
[    1.142252] ata1.00: Disabling SWNCQ mode (depth 1)
[    1.142371] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.142413] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.142460] sd 0:0:0:0: [sda] Write Protect is off
[    1.142463] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

Segue... (4/7)

[dementialsite]

[    1.142486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.142614]  sda:
[    1.152248] ata7.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[    1.152278] ata7.01: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB02, max UDMA/33
[    1.152303] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[    1.152308] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x1f)
[    1.152965] ata2: SATA link down (SStatus 0 SControl 300)
[    1.163262] ata4: SATA link down (SStatus 0 SControl 300)
[    1.168097]  sda1 sda2 sda3 sda4
[    1.173554] ata6: SATA link down (SStatus 0 SControl 300)
[    1.173753] ata7.00: configured for UDMA/33
[    1.188199] ata7.01: configured for UDMA/33
[    1.192550] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[    1.195626] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.200235] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.200238] Uniform CD-ROM driver Revision: 3.20
[    1.200305] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    1.200348] sr 6:0:0:0: Attached scsi generic sg1 type 5
[    1.201107] scsi 6:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB02 PQ: 0 ANSI: 5
[    1.208366] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.208427] sr 6:0:1:0: Attached scsi CD-ROM sr1
[    1.208468] sr 6:0:1:0: Attached scsi generic sg2 type 5
[    1.208498] ata8: port disabled. ignoring.
[    1.208535] Freeing unused kernel memory: 540k freed
[    1.208915] Write protecting the kernel text: 4568k
[    1.208954] Write protecting the kernel read-only data: 1836k
[    1.301351] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    1.360271] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.360704] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    1.360710] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
[    1.360716] forcedeth 0000:00:08.0: setting latency timer to 64
[    1.360760] nv_probe: set workaround bit for reversed mac addr
[    1.362051] Floppy drive(s): fd0 is 1.44M
[    1.368451] Linux agpgart interface v0.103
[    1.398402] FDC 0 is a post-1991 82077
[    1.437702] [drm] Initialized drm 1.1.0 20060810
[    1.442628] usb 1-3: configuration #1 chosen from 1 choice
[    1.442821] hub 1-3:1.0: USB hub found
[    1.444327] hub 1-3:1.0: 4 ports detected
[    1.457988] [drm] radeon default to kernel modesetting DISABLED.
[    1.458819] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[    1.458825]   alloc irq_desc for 16 on node -1
[    1.458827]   alloc kstat_irqs on node -1
[    1.458838] pci 0000:07:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[    1.458844] pci 0000:07:00.0: setting latency timer to 64
[    1.458977] [drm] Initialized radeon 1.31.0 20080528 for 0000:07:00.0 on minor 0
[    1.473376] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    1.473382]   alloc irq_desc for 18 on node -1
[    1.473384]   alloc kstat_irqs on node -1
[    1.473395] ohci1394 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    1.534038] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    1.805025] usb 2-4: new low speed USB device using ohci_hcd and address 2
[    1.884860] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:c7:f4:bf
[    1.884865] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[    2.018202] usb 2-4: configuration #1 chosen from 1 choice
[    2.027542] usbcore: registered new interface driver hiddev
[    2.033294] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4
[    2.033374] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-4/input0
[    2.033394] usbcore: registered new interface driver usbhid
[    2.033397] usbhid: v2.6:USB HID core driver
[    2.101524] usb 1-3.4: new high speed USB device using ehci_hcd and address 4
[    2.217597] usb 1-3.4: configuration #1 chosen from 1 choice
[    2.226317] Initializing USB Mass Storage driver...
[    2.226562] scsi8 : SCSI emulation for USB Mass Storage devices
[    2.226668] usb-storage: device found at 4
[    2.226672] usb-storage: waiting for device to settle before scanning
[    2.226678] usbcore: registered new interface driver usb-storage
[    2.226681] USB Mass Storage support registered.
[    2.486169] PM: Starting manual resume from disk
[    2.486174] PM: Resume from partition 8:4
[    2.486176] PM: Checking hibernation image.
[    2.486329] PM: Resume from disk failed.
[    2.507396] EXT4-fs (sda3): barriers enabled
[    2.525463] kjournald2 starting: pid 419, dev sda3:8, commit interval 5 seconds
[    2.525475] EXT4-fs (sda3): delayed allocation enabled
[    2.525478] EXT4-fs: file extents enabled
[    2.527121] EXT4-fs: mballoc enabled
[    2.527135] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    2.817223] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[2000000003000f6a]
[    3.074089] type=1505 audit(1261235589.532:2): operation="profile_load" pid=442 name=/usr/share/gdm/guest-session/Xsession
[    3.076387] type=1505 audit(1261235589.534:3): operation="profile_load" pid=443 name=/sbin/dhclient3
[    3.076681] type=1505 audit(1261235589.534:4): operation="profile_load" pid=443 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    3.076850] type=1505 audit(1261235589.534:5): operation="profile_load" pid=443 name=/usr/lib/connman/scripts/dhclient-script
[    3.127699] type=1505 audit(1261235589.582:6): operation="profile_load" pid=444 name=/usr/bin/evince
[    3.132602] type=1505 audit(1261235589.586:7): operation="profile_load" pid=444 name=/usr/bin/evince-previewer
[    3.135532] type=1505 audit(1261235589.591:8): operation="profile_load" pid=444 name=/usr/bin/evince-thumbnailer
[    3.157458] type=1505 audit(1261235589.615:9): operation="profile_load" pid=446 name=/usr/lib/cups/backend/cups-pdf
[    3.157820] type=1505 audit(1261235589.615:10): operation="profile_load" pid=446 name=/usr/sbin/cupsd
[    7.224203] usb-storage: device scan complete
[    7.229291] scsi 8:0:0:0: Direct-Access     Packard  Bell Carbon      0001 PQ: 0 ANSI: 2
[    7.229696] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    7.230526] sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    7.234520] sd 8:0:0:0: [sdb] Write Protect is off
[    7.234523] sd 8:0:0:0: [sdb] Mode Sense: 38 00 00 00
[    7.234526] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    7.238518] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    7.238522]  sdb:
[    7.270139] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.270142] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.270146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.270151] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.270156] end_request: I/O error, dev sdb, sector 0
[    7.270159] __ratelimit: 3 callbacks suppressed
[    7.270162] Buffer I/O error on device sdb, logical block 0
[    7.301139] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.301141] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.301144] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.301148] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.301152] end_request: I/O error, dev sdb, sector 0
[    7.301155] Buffer I/O error on device sdb, logical block 0
[    7.332140] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.332142] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.332146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.332149] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.332153] end_request: I/O error, dev sdb, sector 0
[    7.332156] Buffer I/O error on device sdb, logical block 0
[    7.363140] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.363143] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.363146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.363150] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.363153] end_request: I/O error, dev sdb, sector 0
[    7.363156] Buffer I/O error on device sdb, logical block 0
[    7.394140] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.394143] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.394146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.394150] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.394153] end_request: I/O error, dev sdb, sector 0
[    7.394156] Buffer I/O error on device sdb, logical block 0
[    7.394169] ldm_validate_partition_table(): Disk read failed.
[    7.425141] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.425144] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.425147] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.425151] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.425155] end_request: I/O error, dev sdb, sector 0
[    7.425157] Buffer I/O error on device sdb, logical block 0
[    7.456139] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.456141] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.456145] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.456148] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.456152] end_request: I/O error, dev sdb, sector 0
[    7.456155] Buffer I/O error on device sdb, logical block 0

Segue... (5/7)

[dementialsite]

[    7.487141] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.487143] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.487146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.487151] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.487154] end_request: I/O error, dev sdb, sector 0
[    7.487157] Buffer I/O error on device sdb, logical block 0
[    7.518140] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.518143] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.518146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.518150] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.518153] end_request: I/O error, dev sdb, sector 0
[    7.518156] Buffer I/O error on device sdb, logical block 0
[    7.518169] Dev sdb: unable to read RDB block 0
[    7.549141] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.549144] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.549147] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.549151] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.549155] end_request: I/O error, dev sdb, sector 0
[    7.549158] Buffer I/O error on device sdb, logical block 0
[    7.580140] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.580142] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.580146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.580149] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.580153] end_request: I/O error, dev sdb, sector 0
[    7.611142] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.611144] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.611148] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.611152] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.611156] end_request: I/O error, dev sdb, sector 24
[    7.642140] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.642143] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.642146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.642150] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.642153] end_request: I/O error, dev sdb, sector 24
[    7.673141] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.673143] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.673146] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.673150] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.673154] end_request: I/O error, dev sdb, sector 0
[    7.704144] sd 8:0:0:0: [sdb] Unhandled sense code
[    7.704147] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    7.704150] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[    7.704154] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[    7.704157] end_request: I/O error, dev sdb, sector 0
[    7.704170]  unable to read partition table
[    7.708520] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[    7.708523] sd 8:0:0:0: [sdb] Attached SCSI disk
[   12.698307] udev: starting version 147
[   12.710130] Adding 996020k swap on /dev/sda4.  Priority:-1 extents:1 across:996020k 
[   12.714400] lp: driver loaded but no devices found
[   12.744487] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   12.744495] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45]
[   12.744498] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.744502] nForce2_smbus 0000:00:01.1: Error probing SMB2.
[   12.763140] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.763168] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   12.802186] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   12.805955] EXT4-fs (sda3): internal journal on sda3:8
[   12.855340] lp0: using parport0 (interrupt-driven).
[   12.906324] ppdev: user-space parallel port driver
[   12.944815] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.976348] cfg80211: Calling CRDA to update world regulatory domain
[   12.990145] sd 8:0:0:0: [sdb] Unhandled sense code
[   12.990151] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   12.990155] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   12.990161] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   12.990166] end_request: I/O error, dev sdb, sector 0
[   12.990173] __ratelimit: 5 callbacks suppressed
[   12.990177] Buffer I/O error on device sdb, logical block 0
[   12.990186] Buffer I/O error on device sdb, logical block 1
[   12.990189] Buffer I/O error on device sdb, logical block 2
[   12.990193] Buffer I/O error on device sdb, logical block 3
[   12.990196] Buffer I/O error on device sdb, logical block 4
[   12.990199] Buffer I/O error on device sdb, logical block 5
[   12.990202] Buffer I/O error on device sdb, logical block 6
[   12.990206] Buffer I/O error on device sdb, logical block 7
[   12.990209] Buffer I/O error on device sdb, logical block 8
[   12.990212] Buffer I/O error on device sdb, logical block 9
[   13.028142] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.028147] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.028151] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.028156] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.028162] end_request: I/O error, dev sdb, sector 240
[   13.030696] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[   13.030703]   alloc irq_desc for 17 on node -1
[   13.030705]   alloc kstat_irqs on node -1
[   13.030716] rt61pci 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[   13.045034] cfg80211: World regulatory domain updated:
[   13.045039] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.045043] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.045046] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.045049] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.045052] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.045055] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.051534] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[   13.051541] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21
[   13.051574] HDA Intel 0000:00:06.1: setting latency timer to 64
[   13.061061] phy0: Selected rate control algorithm 'minstrel'
[   13.061655] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.061661] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.061666] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.061670] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.061675] end_request: I/O error, dev sdb, sector 0
[   13.061810] Registered led device: rt61pci-phy0::radio
[   13.061827] Registered led device: rt61pci-phy0::assoc
[   13.125148] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.125153] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.125157] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.125162] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.125167] end_request: I/O error, dev sdb, sector 0
[   13.201034] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.201040] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.201044] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.201049] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.201054] end_request: I/O error, dev sdb, sector 0
[   13.245274] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.245281] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.245288] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.245296] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.245303] end_request: I/O error, dev sdb, sector 0
[   13.312910] rt61pci 0000:01:07.0: firmware: requesting rt2561s.bin
[   13.398226] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.400486]   alloc irq_desc for 30 on node -1
[   13.400490]   alloc kstat_irqs on node -1
[   13.400501] forcedeth 0000:00:08.0: irq 30 for MSI/MSI-X
[   13.400692] eth0: no link during initialization.
[   13.401182] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.635050] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.635056] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.635061] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.635065] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.635071] end_request: I/O error, dev sdb, sector 0
[   13.666147] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.666151] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.666155] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.666160] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.666165] end_request: I/O error, dev sdb, sector 240
[   13.699148] sd 8:0:0:0: [sdb] Unhandled sense code
[   13.699153] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   13.699157] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] 
[   13.699162] sd 8:0:0:0: [sdb] Add. Sense: Unrecovered read error
[   13.699167] end_request: I/O error, dev sdb, sector 0
[   13.867660] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input5
[   15.780216] [drm] Setting GART location based on new memory map
[   15.780862] [drm] Loading R500 Microcode
[   15.780886] [drm] Num pipes: 1
[   15.780893] [drm] writeback test succeeded in 1 usecs

Segue... (6/7)

[dementialsite]

Ultime righe:

[   21.272079] wlan0: authenticate with AP 00:0c:f6:28:98:f3
[   21.274157] wlan0: authenticated
[   21.274160] wlan0: associate with AP 00:0c:f6:28:98:f3
[   21.276434] wlan0: RX AssocResp from 00:0c:f6:28:98:f3 (capab=0x411 status=0 aid=1)
[   21.276437] wlan0: associated
[   21.277078] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.204013] wlan0: no IPv6 routers present

Per esserci i problemi ci sono (mi pare di capire che tenti più volte di caricare il disco "sdb", quello esterno appunto)...

Statemi bene...

[dapeco]

Sembra un problema di partizione corrotta, è probabile che con gparted tu riesca a ripristinarla, i dati però non saprei, dipende molto da cosa ti tratta, forse con foremost riesci a recuperare parecchio

[dementialsite]

Ho provato a lanciare GParted via terminale, ma riporta "Errore di I/O durante la lettura da /dev/sdb". Sulla finestra grafica, inoltre, il disco esterno non viene riportato...

Foremost non ho capito come si usa...

Stammi bene...