Salve mi sono registrato da poco e sto cercando di usare il programma ftp,
ma quando cerco di connettermi con pass e account corretti mi da connection timed out
da cosa dipend equesto errore? come lo risolvo?
Grazie anticipatamente.
Emax89
Printable View
Salve mi sono registrato da poco e sto cercando di usare il programma ftp,
ma quando cerco di connettermi con pass e account corretti mi da connection timed out
da cosa dipend equesto errore? come lo risolvo?
Grazie anticipatamente.
Emax89
quale programma usi?
ho provato sia con smart che con bullet prof
questo probabilmente è dovuto al fatto che non hai attivato la pasv mode; dopo un po' di tempo di innatttività la connessione si interrompe.
ciao
Io ti consiglio vivamente di adottare Cuteftp come client ftp. E' il migliore e ha una grafica facila ed intuitiva che ti permettera di imparare subito ad usare il ftp e a non avere più questi problemi.Anche se non ne hai bisogno,scaricalo,vedrai che non vorrai più alcun altro client.Puoi scaricarlo qui
P.S= :=D: Cosa ne pensate della mia pubblicità:Cuteftp mi pagherà???!!!!:=D:
*** CuteFTP 7.0 - build Jun 7 2005 ***
STATUS:> Getting listing ""...
STATUS:> Resolving host name host169-149.pool8253.interbusiness.it...
STATUS:> Host name host169-149.pool8253.interbusiness.it resolved: ip = 82.53.149.169.
STATUS:> Connecting to FTP server host169-149.pool8253.interbusiness.it:21 (ip = 82.53.149.169)...
ERROR:> The connection failed due to an error or timeout.
1) Verify that the destination IP address is correct.
2) Increase the connection timeout threshold under Global Settings | Connection.
3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
4) Verify that the problem is not local by trying to connect to an alternate server.
5) If a server name was used, verify it resolves to the correct address.
6) If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address.
7) Try pinging the address.
8) If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
9) Do a traceroute to the destination to verify all routers along the connection path are operational.
10) Verify that your subnet mask is setup properly.
11) Verify that your local software or hardware firewall is not blocking outbound connections originating from CuteFTP.
12) Verify that your anti-virus software is not at fault (try disabling it).
non ho la piu pallida idea di che cosa devo fare :cry: :cry: :cry:
Ma tu non usi Altervista come Host perchè altrimenti il testo sarebbe questo:
*** CuteFTP 7.0 - build Jun 7 2005 ***
STATUS:> Getting listing ""...
STATUS:> Resolving host name ftp.emax89.altervista.org...
STATUS:> Host name ftp.emax89.altervista.org resolved: ip = 66.98.158.19.
STATUS:> Connecting to FTP server ftp.emax89.altervista.org:21 (ip = 66.98.158.19)...
STATUS:> Socket connected. Waiting for welcome message...
220--- AlterVista FTP, based on Pure-FTPd --
220-Sei l'utente numero 10 di 50 consentiti
220-L'ora locale è 00:06. Porta del server: 21.
220-Questo è un sistema privato - Nessun login anonimo
220 Sarai disconnesso dopo 5 minuti di inattività.
STATUS:> Connected. Authenticating...
TI RICORDO I DATI PER IL LOGIN:
HOST: ftp.emax89.altervista.org
USER: emax89
PASSWORD:La tua
VERIFICA CHE SIA TUTTO GIUSTO.Ciao!!!
*** CuteFTP 7.0 - build Jun 7 2005 ***
STATUS:> Getting listing ""...
STATUS:> Resolving host name ftp.emax89.altervista.org...
STATUS:> Host name ftp.emax89.altervista.org resolved: ip = 67.15.189.15.
STATUS:> Connecting to FTP server ftp.emax89.altervista.org:21 (ip = 67.15.189.15)...
ERROR:> The connection failed due to an error or timeout.
1) Verify that the destination IP address is correct.
2) Increase the connection timeout threshold under Global Settings | Connection.
3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
4) Verify that the problem is not local by trying to connect to an alternate server.
5) If a server name was used, verify it resolves to the correct address.
6) If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address.
7) Try pinging the address.
8) If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
9) Do a traceroute to the destination to verify all routers along the connection path are operational.
10) Verify that your subnet mask is setup properly.
11) Verify that your local software or hardware firewall is not blocking outbound connections originating from CuteFTP.
12) Verify that your anti-virus software is not at fault (try disabling it).
Che pollo che sono.......cmq mi da sempre lo stesso errore
a quanto pare hai un "qualcosa" che blocca la conessione, prova a disattivare firewall o antivirus o qualsiasi programma del genere ....Citazione:
7) Try pinging the address.
8) If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
9) Do a traceroute to the destination to verify all routers along the connection path are operational.
10) Verify that your subnet mask is setup properly.
11) Verify that your local software or hardware firewall is not blocking outbound connections originating from CuteFTP.
12) Verify that your anti-virus software is not at fault (try disabling it).
siiiiiiiiiiiiiiii firewall maledetto!!!!!!!!!!!!!!!!!!!!!!!!!!! ora funziona, devo solo mettermi sotto :=D:
grazie a tutti per l'aiuto!!!!!!!!!!
GRAZIE!!!!