[ubuntu] problema di connessione
ciao a tutti ho un piccolo problemino e spero mi possiate aiutare.....
ho installato il modem d-link dsl 200 su ubuntu 7.10, ma al momento della connessione si blocca, ecco quanto esce:
Codice:
[EciAdsl 1/5] Setting up USB support...
Preliminary USB device filesystem is OK
[EciAdsl 2/5] Uploading firmware...
Process skipped .. no more needed
firmware loaded successfully
[EciAdsl 3/5] Synchronization...
OK eciadsl-synch: success
Synchronization successful
[EciAdsl 4/5] Connecting to provider...
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x1 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6243), status = 0x0
Modem hangup
Connection terminated.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x2 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6268), status = 0x0
Modem hangup
Connection terminated.
using channel 3
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x3 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6288), status = 0x0
Modem hangup
Connection terminated.
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x4 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6308), status = 0x0
Modem hangup
Connection terminated.
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x5 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6328), status = 0x0
Modem hangup
Connection terminated.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x6 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6348), status = 0x0
Modem hangup
Connection terminated.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x7 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6368), status = 0x0
Modem hangup
Connection terminated.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x8 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6388), status = 0x0
Modem hangup
Connection terminated.
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x9 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6408), status = 0x0
Modem hangup
Connection terminated.
using channel 10
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0xa <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode LLC_RFC2364 finished (pid 6429), status = 0x0
Modem hangup
Connection terminated.
ERROR: failed to connect
ho provato a dare eciadsl-doctor.....sperando sfosse utile......se fatto prima di tentare la connessione esce quanto segue:
Codice:
You are using linux kernel version 2.6.22-14-generic
Support for USB is OK
Preliminary USB device filesystem is missing... trying to mount
mount: unknown filesystem type 'usbdevfs'
Preliminary USB device filesystem: failed to load
se invece, prima tento una connessione mi da cio:
Codice:
You are using linux kernel version 2.6.22-14-generic
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
UHCI support is OK
OHCI support is not needed
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
Loading EZ-USB firmware...
Process skipped .. no more needed
Loading the GlobeSpan firmware...
OK eciadsl-synch: success
You are using pppd version 2.4.4 (untested)
No existing PPP connection... trying to make one (please wait)
using channel 4
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x1 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode VCM_RFC2364 finished (pid 6939), status = 0x0
Modem hangup
Connection terminated.
using channel 5
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x2 <magic>]
Script /usr/local/bin/eciadsl-pppoeci -vpi 8 -vci 35 -vendor 0x0915 -product 0x8104 -mode VCM_RFC2364 finished (pid 6959), status = 0x0
Modem hangup
Connection terminated.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
sent [LCP ConfReq id=0x3 <magic>]
LCP: timeout sending Config-Requests
Connection terminated.
PPP: very bad ... usermode driver just crashed
in questo caso si blocca e ho dovuto chiudere tutto con ctrl+c
spero mi possiate dare una mano...
ciao
