Visualizzazione risultati 1 fino 7 di 7

Discussione: [cloak] validazione w3c

  1. #1
    Guest

    Exclamation [cloak] validazione w3c

    Salve, volevo segnalare che il frameset utilizzato per il cloaking per i domini di secondo livello non è conforme allo standard del w3c.
    Il che è fastidioso perchè quando passo il validator (http://validator.w3.org/) sul mio sito dandogli in pasto il file che sta fisicamente su altervista me lo valida senza errori.
    Quando invece gli dò in pasto il mio indirizzo di dominio di secondo livello non me lo dà corretto per via dei frameset.
    Gli errori sono 3 e a quanto pare è solo perchè gli attributi FRAMEBORDER, FRAMESPACING e BORDER alla riga 10 sono scritti in maiuscolo anzichè in minuscolo.
    Visto che è una cosa non modificabile dall'utente e che è un errore comune per tutti quelli che hanno il cloaking, potreste cortesemente ovviare al problema?
    Grazie

  2. #2
    Guest

    Predefinito

    sono abbandonata a me stessa?

  3. #3
    Guest

    Predefinito

    Da quando scrivere in maiuscolo il sorgente è un errore di sintassi?

    PS: Sezione sbagliata, andava in Basi Siti Web -> Validazione

  4. #4
    L'avatar di darkwolf
    darkwolf non è connesso Super Moderatore
    Data registrazione
    18-04-2007
    Residenza
    Reggiolo (RE)
    Messaggi
    6,552

    Predefinito

    Citazione Originalmente inviato da biccheddu Visualizza messaggio
    Da quando scrivere in maiuscolo il sorgente è un errore di sintassi?
    Da quando hanno inventato l'xhtml? :P
    http://www.webmasterpoint.org/guida-...xhtml_a11.html
    Ultima modifica di darkwolf : 08-06-2009 alle ore 18.27.10
    » Salvatore Noschese - L'AltroWeb | Seguimi su: facebook | twitter | Google+
    # Che aspetti? Unisciti alla community! Tanti nuovi gruppi ti aspettano


  5. #5
    Guest

    Predefinito

    Non mi ero mai accorto di questo problema sinceramente, forse perchè non ho mai sopportato il caps!

    Scusa labomboniera, non lo sapevo

    Chiudo l'OT qui. Grazie a dark, per la delucidazione

  6. #6
    Guest

    Predefinito

    Sì, scusatemi, è che poi non ho avuto modo di spostarmi da sola il topic quando me ne sono accorta, per favore fatelo voi.
    Sotto vi scrivo cosa mi dice il validator, cmq potreste verificarlo voi direttamente tramite il sito http://validator.w3.org/
    con uno qualsiasi dei vostri siti che vanno in cloaking.
    So che in fondo alla maggior parte delle persone potrebbe interessare poco l'argomento, xò nel rifare il sito sono stata attentissima a renderlo compliant ed accessibile e mi dispiace che x un errore stupido non passo la validazione, che poi credo influisca anche sul rating di google.
    Per favore non abbandonatemi, fatemi sapere.
    Grazie.

    1. Error Line 11, Column 50: Attribute "FRAMEBORDER" is not a valid attribute. Did you mean "frameborder"?

    <frameset rows="100%,*" cols="100%" frameborder="no" framespacing="0" border="0">



    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
    2. Error Line 11, Column 68: Attribute "FRAMESPACING" is not a valid attribute

    …0%,*" cols="100%" frameborder="no" framespacing="0" border="0">



    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
    3. Error Line 11, Column 79: Attribute "BORDER" is not a valid attribute. Did you mean "border"?

    …eborder="no" framespacing="0" border="0">



    You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

    This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

    How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.

  7. #7
    L'avatar di Gianluca
    Gianluca non è connesso Amministratore
    Data registrazione
    15-02-2001
    Messaggi
    18,035

    Predefinito

    Dubito fortemente che la validazione abbia una qualche influenza sui ranking di google: http://validator.w3.org/check?uri=ww...Inline&group=0

    Sposto il thread in quanto questa non è la sezione corretta.
    Gianluca

Tags for this Thread

Regole di scrittura

  • Non puoi creare nuove discussioni
  • Non puoi rispondere ai messaggi
  • Non puoi inserire allegati.
  • Non puoi modificare i tuoi messaggi
  •